How it started: mp80
I bought a MiniPC (Blackview MP-80) to run Home Assistant and some lights etc. to go with it.

It’s now exactly one year later this is what my setup looks like now:
BMAX B2 Pro --> Home Assistant OS Blackview MP-80 --> Proxmox --> Nextcloud-AIO & Immich
ODROID H4+ --> Proxmox --> TrueNAS

How it’s going: odroid
With the heatwave in Europe I’ve now installed cooling to keep my HDD’s from heating up.

I know it’s Janky as hell, but I love it. The plan going forward is to buy a 3D Printer so that I can 3D Print a custom 10" rack, and I’ll build my own cooling and temperature monitoring system with ESP32 and create a dashboard for it in Home Assistant and sorting out networking.

It’s a work in progress, having a lot of fun learning and adding new things.

  • Evil_Shrubbery@lemmy.zipEnglish
    2·
    22 hours ago

    Yeah, it’s fine … wait, IronWolves in a living space? Paired with that acoustic desk it must be like a train yard, but with more vibrations :D.

    Edit: wrote this before I saw your comment acknowledging the same.
    Well, with HDD there is the noise of the drive itself (the constant one & the searches, spin-ups), and the vibrations which can get acoustically amplified. For the former you need a case, any case, maybe a case in a case (ventilated ofc), for the latter I’ve always (since late 90s) had my HDD on full rubber, no non-rubber connection to the case.

    My current NASies all use these (in desktop cases, I don’t like server hardware if it isn’t necessary, like with disks):

    (They cost like 2 monies with shipping.)

    So if going the 3D-print way, as you mentioned, I would def add the suggestion of incorporating thicc rubber pads or rubber straps into your design, like these ones (I’ve used them a lot decades ago, the only commercial option for silent PC enthusiasts at the time, but I’ve built then myself too):

    (It’s rigid, the disks won’t fall out.)

    • toketin@feddit.itEnglish
      2·
      3 hours ago

      Hi, which is the name of this kind of cases? I’m looking a similar way in order to add an external HDD on my local server which is a Lenovo Thinkcentre SFF, so with 3 disks of space (1 hdd 3.5" + 1 2.5" + 1 nvme). Thanks!

      • Evil_Shrubbery@lemmy.zipEnglish
        2·
        3 hours ago

        The key search words in your (Chinese? better than rewarding Amazon with even more extra fees) store of choice I wound suggest:

        3.5" to 5.25" Internal Hard Disk Mount Rubber

        But don’t get the ones where the inner mount (of the 3.5" drive) is the same piece or bolted/screwed into the outer mount (5.25").

        The ones in my pic have fairy big rubber nips in between (each secured on both sides), 4 at the bottom (that support the weight if the disk too), and two on the sides.

        Also such 5" brackets you mount anywhere rally, even on the outside of the case, lol.
        In one case without the 5.25" bays (at my parents, quick job) I mounted two disks on such mounts on that metal mesh between the PSU compartment and main compartment.

    • Ek-Hou-Van-Braai@piefed.socialOPEnglish
      2·
      12 hours ago

      The one is a Iron Wolf, the other is a WD Gold, both of which are ~5 years old, they were LOUD when I had a database running on them. They are now a lot quieter than my work laptop so they don’t bug me anymore.

      Thanks for the advice, I really like these solutions I’ll definitely look into them